- Army Tactical Missile System Block IA Unitary
- Dual Mode Laser Guided Bomb (DMLGB)
- Dual Mode Plus
- Enhanced Laser Guided Training Round (ELGTR)
- Guided MLRS Unitary Rocket
- High Mobility Artillery Rocket System
- Intercontinental Ballistic Missile (ICBM)
- LCS Integrated Surface Warfare System
- M299 Missile Launcher
- Multiple Launch Rocket System (MLRS M270A1)
- Multiple Launch Rocket System M270
- Naval Launchers and Munitions
- Navy 5-inch Guided Projectile
- Patriot Advanced Capability-3 (PAC-3)
- Paveway II Plus Laser Guided Bomb (LGB)
- Precision Munitions Training System (PMTS)
- Reduced-Range Practice Rocket (RRPR)
- Tactical Tomahawk Weapons Control System (TTWCS)
- Trident II D5 Fleet Ballistic Missile (FBM)
- Aegis Combat System
- Command and Control, Battle Management, and Communications (C2BMC) System
- DIAMONDShield Integrated Air & Missile Defense
- MEADS Internal Communications Subsystem (MICS)
- Medium Extended Air Defense System (MEADS)
- Patriot Advanced Capability (PAC-3) Missile Segment Enhancement (MSE)
- Patriot Advanced Capability-3 (PAC-3)
- Targets and Countermeasures
- Terminal High Altitude Area Defense
- Airborne Ground Surveillance Radar Systems
- Electronic Warfare
- Flight Operations Services – Goodyear, Arizona
- Ground-Based Air Surveillance Radars
- Long Range Discrimination Radar (LRDR)
- Medium Extended Air Defense System (MEADS)
- Phoenix Eye AN/APY-12
- Space Fence
- Three Dimensional Expeditionary Long-Range Radar (3DELRR)
- Airborne Multi-INT Laboratory (AML)
- DRAGON Family of Intelligence, Surveillance & Reconnaissance
- Electronic Warfare
- F-35 Lightning II Electro-Optical Targeting System (EOTS)
- Gravity Gradiometry
- Gyrocam Systems
- IRST21 Sensor System
- International C4ISR
- LANTIRN ER
- LONGBOW FCR and LONGBOW HELLFIRE Missile
- LONGBOW UTA
- Laser and Sensor Systems
- Legion Pod
- Missile Launch Detector (MLD)
- Modernized Day Sensor Assembly (M-DSA)
- Open Architecture Processor
- Persistent Threat Detection System
- Phoenix Eye AN/APY-12
- Q-39 (AN/AAQ-39)
- Self-Powered Ad-hoc Network (SPAN)
- Sniper Advanced Targeting Pod
- TADS Electronic Display and Control (TEDAC)
- ASW Training Targets
- Advanced Gunnery Training System
- After Market Enterprise (AME)
- Autonomic Logistics Information System
- C-130J Maintenance and Aircrew Training System
- Exoskeleton Technologies
- F-35 Lightning II Training Systems
- Global Supply Chain Services
- Military Flying Training System
- Multi-Function Training Aid
- Seaport Enhanced
- Urban Operations Training Systems
- Desert Hawk III
- Expeditionary Ground Control System (xGCS)
- Falcon HTV-2
- Fury Unmanned Aerial System (UAS)
- High Altitude Airship
- Hydra Fusion Tools™
- Indago UAS
- Kestrel Flight Systems & Autopilot
- Lighter-Than-Air Vehicles
- OnPoint Vision Systems
- Perceptor Dual Sensor Gimbal
- Persistent Threat Detection System
- Remote Minehunting System
- Stalker UAS
- Video Screener
- Air Defense Command and Control
- Chief Information Officers Solutions and Partners 3 (CIO-SP3)
- Defense IT
- EAGLE II
- Flight Operations for Defense
- Full Motion Video
- GeoMeasure App
- Geospatial Intelligence
- Integrated Space Command & Control (ISC2)
- Integrated Strategic Planning and Analysis Network (ISPAN)
- Intranet Quorum
- LM WISDOM®
- Metrology Service Laboratories
- Network-Centric Solutions (NETCENTS)
- Service-Oriented Architecture
- Advanced Extremely High Frequency (AEHF)
- Defense Meteorological Satellite Program (DMSP)
- Defense Satellite Communications System (DSCS)
- Global Positioning System (GPS)
- Global Positioning System (GPS) Ground Control Segment Sustainment
- Mobile User Objective System (MUOS)
- Space Based Infrared System (SBIRS)
Lockheed Martin and our SeaPort-e Teammates provide qualified personnel, materials, facilities, equipment, test instrumentation, data collection and analysis hardware and software and services to fully support NSWC and NUWC in the execution of their missions. We offer capabilities in all the functional areas the SeaPort-e contract defines, as described below.
Research and Development Support
This functional area consists of supporting the development and application of scientific and analytical disciplines to conduct fundamental research; scientific study and experimentation directed toward advancing the state-of-the-art or increasing knowledge or understanding; concept formulation; assessment of system and subsystem requirements; development, analysis and evaluation of concepts, technologies, systems and subsystems; and development of operational concepts and tactics with the end goal being the application of results to developing new or improving existing war fighting capabilities. This effort may include manning, operations, and maintaining test support craft and experimental vessels in the open ocean or restricted waters to support tests.
Engineering, System Engineering and Process Engineering Support
This functional area consists of supporting the application of engineering disciplines to technically support development of new war fighting capabilities and systems, technically support development of significant alterations to existing systems, support integration of existing equipment or software into different applications or platforms to support the war fighter, and support evaluation of foreign or non-developmental weapons systems, equipments, and technologies to satisfy existing war fighting requirements. Support is required for system and process engineering disciplines that systematically consider the requirements, synthesize and evaluate alternative concepts, identify a recommended selection, and generate a design and system specification.
Modeling, Simulation, Stimulation, and Analysis Support
This functional area consists of the application of a standardized, rigorous, structured methodology to create and validate a physical, mathematical, or otherwise logical representation of a system, entity, phenomenon, or process. The functional area involves the use of models, including emulators, prototypes, simulators, and stimulators, either statically or over time, to develop data as a basis for making managerial, technical, strategic, or tactical decisions.
Prototyping, Pre-Production, Model-Making, and Fabrication Support
This functional area consists of building, fabrication, testing, evaluating and operating reduced and full scale models, mock-ups, prototypes, pre-production units and research and development (R&D) test tools of electronic and electro-mechanical systems and system elements. Fabrication and machining of replacement parts or equipments for fielded systems or platforms is included. Includes the use of traditional materials as well as new composite materials.
System Design Documentation and Technical Data Support
This functional area involves the engineering effort required to prepare and assure that the detailed technical data documentation that is necessary to support system development reflects the latest design, configuration, integration, and installation concepts. Technical documentation may be in the form of paper, electronic (digital) or interactive computer systems.
Software Engineering, Development, Programming, and Network Support
This functional area consists of applying the engineering and scientific disciplines to perform technical analysis of, technically support development of or selection of hardware and computer software, or modification to existing hardware and software for systems, test facilities, or training facilities. This also consists of software engineering efforts and programming support required to technically support software implementation in systems, sub-systems, and components utilizing computers, electronics, and software. Planning, designing, coding, testing, integrating, supporting, and delivering algorithms, software (source code and executables), computer programs are the inherent activities of this functional area. Generally, the software development processes used for software development under this contract shall be, as a minimum, assessed at Software Engineering Institute (SEI) Capability Maturity Model (CMM) Level 3 or equivalent, however the Government may specify other (either lower or higher) standards in individual task orders issued under the contract.
Reliability, Maintainability, and Availability (RM&A) Support
This functional area consists of applying engineering, scientific, and analytical disciplines to ensure that systems and platforms RM&A requirements are integrated with the system design, development and life cycle sustainment resulting in war fighting capabilities that function effectively when required and that detection and correction of design deficiencies, weak parts, and workmanship defects that affect functionality are implemented.
Human Factors Engineering Support
This functional area consists of applying engineering, scientific, and analytical disciplines to ensure that design of interactive systems are safer, more secure and easier to use thereby reducing accidents due to human error, increasing system integrity and enabling more efficient process operations. This functional area also includes applying engineering, scientific, and analytical disciplines to ensure that the number, type, mix, knowledge, skills, and abilities (KSAs), aptitudes and physical characteristics of operators, maintainers and support personnel have been defined and documented early in the system design phase.
System Safety Engineering Support
This functional area consists of applying engineering and analytical disciplines to ensure that safety is considered in all aspects of design, development, operation, maintenance, and modification of systems and platforms.
Configuration Management (CM) Support
This functional area consists of applying engineering and analytical disciplines to identify, document, and verify the functional, performance, and physical characteristics of systems, to control changes and non-confonnance, and to track actual configurations of systems and platforms.
Quality Assurance (QA) Support
This functional area consists of applying engineering and analytical disciplines to ensure that the processes and products used in the design, development, fabrication, manufacture of result in quality products.
Information System (IS) Development, Information Assurance (IA), and Information Technology (IT) Support
This functional area consists of providing information system software analysis, requirements definition, design, development, test, modification, installation, implementation, quality assurance, training, and documentation to meet the evolving data storage and reporting needs of programs and management. Analyze existing IT and IS databases, web sites, and IT applications and recommend new or improved interfaces and improved management tools that meet new management requirements, or improve management effectiveness and efficiency. Perform maintenance and technical support for Local Area Networks (LAN) and Wide Area Networks (WAN) that are outside the cognizance of the Navy Marine Corps Intranet (NMCI). Modify, implement and maintain web based information systems and links. Develop web-site structure, prepare documentation for population, implement and maintain web sites. Provide systems engineering and technical support for establishment, test, upgrade, and operational support of systems, networks, workstations and support equipment hardware and software that are outside the cognizance of NMCI. Conduct IA analyses, develop, recommend, and implement, monitor, update, and maintain, IA practices, procedures, equipments, algorithms, and hardware that are outside the cognizance of NMCI.
Inactivation and Disposal Support
This functional area consists of technically supporting the submarine, aircraft, weapons system and ship inactivation and disposal efforts to ensure that critical equipment removed is safeguarded and destroyed in accordance with the appropriate Navy instructions and directives. Provide direct liaison with the Shipyard or Depot and the Navy to insure that critical technology is not inadvertently transferred to foreign nationals or governments. Ensure proper documentation exists for the sale of excess materials from inactivated platforms prior to sale by the Defense Reutilization and Marketing Service (DRMS). Technically support the demilitarization process for shipboard equipment using the Expanded Work Breakdown Structure (EWBS), Trade Security Controls (TSC), and Munitions List Items (MLI) all of which are used to determine the disposition of excess, not-ready for-issue (non-RFI) equipment. Technically support the security classification requirements and guidelines for submarine and surface ship data and equipment necessary to assist in making decisions on sales issues.
Interoperability, Test and Evaluation, Trials Support
This functional area consists of the application of engineering, scientific, and analytical disciplines necessary to ensure that developed platforms, systems, and war fighting capabilities have been properly tested and that joint interoperability requirements have been fully met at all levels of their life cycle .
Measurement Facilities, Range, and Instrumentation Support
This functional area consists of applying engineering, analytical, and technician disciplines in the operation and support of measurement facilities, ranges and instrumentation used for testing, evaluating, experimenting, and exercising platforms and systems.
Acquisition Logistics Support
This functional area consists of applying the engineering and analytical disciplines required to implement acquisition logistics as a multi-functional technical management discipline associated with the experimental development, design, development, test, production, fielding, sustainment, and improvement modifications of cost effective systems that achieve the war fighters' peacetime and wartime readiness requirements. The principal objectives of acquisition logistics are to ensure that support considerations are an integral part of the systems design requirements, that the system can be cost effectively supported through its life-cycle, and that the research and development facilities and infrastructure elements necessary to the design, development, initial fielding, and operational support of the system are identified, developed, acquired, and supported.
Supply and Provisioning Support
This functional area consists of applying the analytical and technical disciplines required to ensure that research and development facilities, experimental and developmental systems, and fielded war fighting capabilities are materially sustained. The principal objectives of this functional area is to ensure that material for fleet operation and maintenance of systems is available when required, that materials are properly stored and transported, and inventories are managed in a cost effective manner to sustain supported systems.
This functional area consists of applying the engineering and analytical disciplines required to ensure that the war fighter and technical support community is provided with adequate instruction including applied exercises resulting in the attainment and retention of knowledge, skills, and attitudes regarding the platforms, systems, and war fighting capabilities they operate and maintain.
In-Service Engineering, Fleet Introduction, Installation and Checkout Support
This functional area consists of the application of engineering, analytical, and technical disciplines and skills to establish and maintain long term engineering, operation, and maintenance support for in-service war fighting capabilities as well as the capability to modernize or introduce transformational technologies into those capabilities.
This functional area consists of applying the business, financial management, and technical disciplines required to support planning, organizing, staffing, controlling, and leading team efforts in managing acquisition programs such that the result places a capable and supportable system in the hands of the war fighting when and where it is needed, and does so at an affordable price. This functional area represents an integration of a complex system of differing but related functional disciplines that must work together to achieve program goals through development, production, deployment, operations, support, and disposal.
This functional area consists of applying the clerical and administrative disciplines required for seamless operation of offices and support functions.
Public Affairs and Multimedia Support
This functional area consists of supporting Public Affairs organizations as it relates to strategic counsel, planning and execution of communication as a function of command goals and requirements for informing, and promoting the successes of the organization both to external and internal media. Public Affairs organizations oversee the development, implementation and execution of the command communication strategy, planning and tactics for enterprise and national-level initiatives across all target audiences. To accomplish this Public affairs organizations require specific contractor public affairs support including; speechwriting, multimedia documentation, development of strategic communication plans, support of the command exhibit program, exhibit planning/services/leasing of exhibit, photography support, design/layout of command publication to provide critical assistance in development of communication messages for the Navy. This area also includes support in the development of multimedia documentation to support Command communication goals; support for development of strategic communication plans to include metrics, technical writing services, message/brand development, visual media to include still, video and multimedia, and other public affairs services.